Tie-down strap 25mm, ratchet R25B1, hook/hook, length 4m - 0.3 + 3.7m, 750/1500daN

1. One-piece clamping strap

2. Two-part fastening strap: Consists of fixed end (FE) units and loose end (LE) units.

3. Strap

4. Label

5. Clamping element: variable - clamping lock, ratchet (see image) or clamping device.

6. End element: variable - double airline connector, single airline connector, flat hook, carabiner, claw hook, combined mounting end, combined element with a chain, crown hook, end connector with a circular hole, S-shaped hook, double pointed hook (see picture), single pointed hook, triangular element, quadruple airline connector or locking hook (flat, swivel, or twisted design).

2. SHF (Standard Hand Force): The prescribed force on the ratchet handle that creates tensile force in the strap.

3. STF (Standard Tension Force): The remaining force/tension force after releasing the handle of the ratchet.

4. Strap Material: The straps are made from multi-layered woven chemical fibers. The material used can be identified by the label and/or tag color.

• PES (polyester), tag color blue, suitable for temperature range -40 °C to +120 °C.
• PA (polyamide), label color green, suitable for a temperature range of -40 °C to +100 °C.
• PP (polypropylene), label color brown, suitable for temperature range -40 °C to +80 °C.

5. Strap Extension: According to DIN, the strap must not extend by more than 7% when subjected to the maximum permissible force LC. Most straps have a maximum extension of no more than 5%.

6. Length of the lashing strap: For one-piece lashing straps, this measurement approximately corresponds to the length of the open, stretched strap. For two-piece straps, it is measured similarly, but the length is stated separately for each unit (fixed end/free end).

7. Warning

8. Manufacturer name or symbol: The symbol Suer Line indicates the own products of Suer Nutzfahrzeugtechnik GmbH & Co. KG.

9. Manufacturer Tracking Code: There is an 8-digit code number on the straps, and below it, the Suer Nutzfahrzeugtechnik item number.

10. Year of Production

11. Standard number: The standard according to which the lashing strap was manufactured and tested.

12. Item Number

13. Permissible Tension Force According to Use: Permissible tension force when wrapped - only for one-piece lashing straps. Permissible tension force in direct pull - only for two-piece lashing straps.

14. Other test marks: Many Suer Line straps have the TÜV and GS mark.

15. Inspection Table: Clamping straps must be inspected by a professional at least once a year. The inspection table can be used to mark the year of inspection.